The Easiest Way to Figure Out Quilt Binding
If you’ve ever had to stop mid-project to figure out binding math… you know it can slow things down fast.
So we made it simple.
How much binding do I need?
Add up the four sides of your quilt (the perimeter), then add 12" for corners and joining the ends. Divide by 40", the usable length of one strip cut across the fabric, and round up. That's your number of strips. Multiply by your strip width (usually 2.5") to get the length of fabric to cut.
Example: a 50" x 65" lap quilt. The perimeter is 230". Add 12" for 242". Divide by 40" for 6.05, so cut 7 strips. At 2.5" each, that's 17.5" of fabric, or about half a yard.
| Quilt size | Binding needed |
|---|---|
| Crib | about 200" |
| Lap | about 300" |
| Twin | about 350" |
| Queen | about 400" |
| King | about 450" |
With Perfect Binding, skip the math. Perfect Binding is pre-printed quilt binding fabric with the cutting lines already on it. One yard gives 13 to 14 strips, enough for any quilt up to king size.
Try the Binding Calculator
👉 Enter your quilt size below and get your binding requirements instantly:
Binding Calculator
Quickly calculate how much binding you need
How It Works
Just enter:
• Your quilt width
• Your quilt height
• Your preferred binding strip width
The calculator will:
• Figure your quilt perimeter
• Calculate how many strips you need
• Estimate your total fabric needed
No guessing. No extra math.
A Few Quick Tips
• Measure your quilt after trimming
• Add a little extra length for joining ends
• Keep your strip width consistent
That’s it. You’re ready to bind.
Why You’ll Love It
Binding is the final step, and it should feel satisfying, not stressful.
This tool keeps things simple so you can focus on finishing your quilt beautifully.
Try It on Your Next Quilt
Give it a spin and see how much easier binding prep can be.
And if you use it, I’d love to hear what you think.




Leave a comment (all fields required)